Saturday, October 23, 2010

Idaho Weightlifting:Programs/Documents

Idaho Weightlifting:Programs/Documents shares a bunch of documents on programs, etc at their site here.

Building a Platform

In helping a local gym construct two lifting platforms, we found the classic plans described on Ironmind to be a great resource:



The primary modification we made was the narrowing of the centerpiece from 48" to 40". Our reason for doing so was to prolong the life of the centerpiece, as we predicted the amount of lifting --and lifts dropped from overhead -- would be pretty high. To compensate, we used two 4'x6' stall mats per platform, each cut into two 4'x28" pieces.


Overall, the platforms are great to lift on. If there is one thing I would change, I would prefer using a thicker matting, like the 'Super Mats' Dynamic Fitness/Eleiko sells. These are the same type of mats used in commercially made platforms, and are also the mats used in the lifting platforms at LBH.


Not too long Ago..

Antonio Krastev trained at Lost Battalion Hall in Queens...where I go every once in a while. He would train twice a day six times a week. His methods are in the Weightlifting Encyclopedia (pages 305-306). You couldn't hear a pin drop when Antonio went into that start position...the long delay...the silence...and the the pull with head tilted off to one side..then he's under it and up on his feet in a flash. What I liked best was the celebrity of it all: the entourage escorting him to and from the platform, the coaches, the water guy, the expediter, the guy holding the smelling salts (that was me!)...everybody involved.

Friday, August 13, 2010

Sunday, July 25, 2010

Updates to the Platform Locator
-Club H in NYC has a platform but no Olympic bars. I would not recommend in light of this.
-Equinox on Greenwich Street has a small platform now, if you can spare the change
-CrossFit Brooklyn is closed (not to be confused with CrossFit South Brooklyn)

Friday, July 23, 2010

Quick Guide to Protein Amounts in Common Foods

Meats G per OZ 1/4 lb 1/2lb lb
Beef 9.0 36.0 72.0 144.0
Turkey, 8.6 34.3 68.5 137.1
Pork 8.2 32.7 65.3 130.7
Turkey, 8.1 32.4 64.8 129.6
Hamburger 8.1 32.4 64.8 129.6
Chicken, 7.9 31.5 62.9 125.9
Tuna 6.7 26.7 53.5 106.9
Broiled 6.4 25.7 51.5 102.9
Chicken, 6.3 25.2 50.4 100.8
Ham 5.9 23.6 47.2 94.4
Salmon 5.6 22.4 44.8 89.6

Tuesday, July 20, 2010

Monday, June 14, 2010

Teen Idol

Saturday, June 5, 2010

On Lifting

"Yeah, sure, use a belt. Why not? Buy some sleeves if you like. Whatever makes you happy. Slip on a condom if it makes you feel more secure."

"You don't wanna look down. Look straight ahead instead. We'll put a big picture of a pussy on that wall for ya. If you like, we can put a big dick up there too, and you can take your pick."

-MC

Thursday, June 3, 2010

Antonio Krastev
195kg CJ
1992 NYS Meet

Friday, May 28, 2010

Dave Bruzzi

If you've ever lifted at a meet in the NY area, you probably recognize Dave Bruzzi. He holds the US National Masters records in the 77kg class, 40-44 age group, with a 122.5 snatch, a 155 clean & jerk, and a 275 total (all done in the period of 1998-1999).

Below is video from the 1992 NY State competition.

Saturday, May 15, 2010

What's the Point of Having a Platform and Bumper Plates...

...if you're not allowed to drop the weights.

Updates made to the platform/bumper plate locator:
-Removed Edge on the Upper East Side
-CrossFit South Brooklyn has moved to a larger location
-There may be a platform at Club H Fitness in Jersey City (to be confirmed)

Monday, May 10, 2010

JERK Supports

By Jim Schmitz, U.S. Olympic Weightlifting Team Coach 1980, 1988 & 1992.

"The jerk support is done by placing the bar in the rack at just above your head, maybe an inch or two above; if it is your first time I recommend 2 inches above your head. As you get better at it you lower the starting position, but not any lower than your head. You use your clean and jerk grip and your feet are hip- to shoulder-width apart. Squat directly underneath the bar with your arms extended and locked out directly above your ears, shoulders, hips, and ankles. Your arms, head, body, hips, and ankles must be directly in line under the bar in what is called the power position. The power position is the position where you catch or receive your power snatch and clean: approximately a quarter squat. Tense or tighten up all your muscles, and then stand up by pushing up with your arms and down with your legs. Practice a few times with a naked bar; then start adding weight. It will surprise you how wobbly you are at first. When you are fully erect, hold the weight for 2 seconds or so: the bar should be directly over your ears, shoulders, hips, knees, and ankles. Lower the bar under control and repeat."

Full:here.

Saturday, April 17, 2010

Programs and Splits

Earlier I discussed some here....
Am currently enjoying a push-pull split since joining the health club gym across from work and training mostly away from a real platform.  I have been inspired largely by an old Glenn Pendlay forum post  pasted below.

I've even seen people who after a while on a 3 day a week program, switched to a 4 day split, doing squats and pressing exercises on Monday and Thursday, back and pulling exercises on wed and Saturday. I don't see this as retreating from the principles of the 5 by 5 at all. you are STILL working your whole body, or very nearly so, every training day. squats work the back, they work everything... and deadlifts or stiff legged deadlifts work the legs, not as much as squats, but they still work them. this is in fact the favored program of mike stone, probably the best ex phys guy on the planet and former head of sports science at the Olympic training center.
the main thing is to go about it in a systematic way.

one of my lifters, josh wells, who made the junior world team in 2004 in weightlifting, and can jerk close to 400lbs weighing around 180lbs as a teenager, did this program about a year ago in his "off season" to try to gain some general strength.
  • Monday, squats (5 sets of 3), push presses (3 sets of 5) then glute ham raises or reverse hypers
  • Wednesday, snatch pulls (5 sets of 2), powercleans (5 sets of 2), chin-ups (5 sets of 10 with extra weight, hanging from a 2" bar)
  • Thursday, front squats (6 sets of 2), push jerks (5 sets of 2), military press (3 sets of 5), then glute ham raises or reverse hypers.
  • Saturday, powersnatches (5 sets of 2), clean pulls (5 sets of 5), barbell rows, (5 sets of 5)
Splitting up the work but still using total body lifts. One thing I am finding is that heavy squats and heavy overhead work (push presses or jerks) on the same day takes a lot out of me.

Saturday, March 20, 2010

Functional Hypertrophy for Athletes

An effective workout to develop the type of muscle mass that athletes need
by Charles Poliquin

In the strength coaching profession it’s ironic that the trainers hired to improve athletic performance often do not possess the ideal physique for athletics. For example, a bodybuilder might be extremely intimidating in a mixed martial arts arena or on a football field, but in some situations a much smaller opponent may be significantly stronger and more powerful than that same bodybuilder. In fact, I’ve seen three Mr. Olympia contestants, in the off-season when they are strongest, who could not bench press 315 pounds for six reps – not exactly NFL standard.


Although most athletes simply want to jump into a workout that will help them build muscle mass and strength for their sport – and indeed I will provide two examples of such a workout at the end of this article – it’s important to understand that there are many types of hypertrophy. What type of hypertrophy an athlete should focus on depends upon the nature of the sport – which means the training protocols of the reigning Mr. Olympia or even the legendary Arnold (as amazing and innovative as he was as a bodybuilder) may not be the best training protocols for every athlete.

It would be great if muscle building for athletes were as simple as just following the popular bodybuilding workouts, but the methods used by many professional bodybuilders often do not produce the desired gains in strength and power specific to most sports. It’s possible – and I’m completely serious when I say this – that for certain types of athletes the resistance training protocols used by women fitness competitors may be more appropriate than those used by most professional bodybuilders. Let me give you an example.

If a high school strength coach is training a freshman lineman who has never lifted weights before, simply putting him on a standard bodybuilding program with basic movements such as the bench press and leg press may make him a better athlete. But even though most likely he will run faster and be able to block and tackle more aggressively, very quickly these standard training methods will lead to a point of diminishing returns compared to other training protocols. Granted, traditional bodybuilding methods are better than nothing, but it is a mistake to believe that such a simplistic approach would be the optimal training method for this athlete to use throughout high school and college. If it were, you would see a lot more college and professional football players training like the genetically gifted monsters you see on the covers of muscle magazines.

Breaking Down Muscle Fibers
Studies have shown that the types of hypertrophy gains in individuals who use bodybuilding programs are different from the gains in those who use weightlifting programs. The muscle fibers hypertrophied in bodybuilding programs are primarily Type I fibers, whereas the muscle fibers hypertrophied in weightlifting programs are the much more powerful Type II fibers. And this is not a matter of opinion – these recommendations are supported by peer-reviewed research.

In a study that was published in 2004 in the respected publication Sports Medicine, Dr. Andrew Fry examined the muscle fiber types of weightlifters, powerlifters and bodybuilders. Fry and his colleagues found that among the three groups, bodybuilders had the highest percentage of Type II fibers but the lowest percentage of Type I. The weightlifters, in contrast, possessed the highest percentage of Type II fibers but the lowest percentage of Type I. The powerlifters were positioned in the middle: They had more Type II fibers than the bodybuilders but not as much as the weightlifters, and they had more Type I fibers than the weightlifters but not as much as the bodybuilders. So for an athlete, training like a powerlifter would be better than training like a bodybuilder, but training like a weightlifter would be better than training like a powerlifter.

One of the key concepts I teach is that rather than using percentages, it is more practical to “let the repetitions determine the load.” And with this perspective, I use the following general guideline to determine which muscle fiber is hypertrophied in a set: 1-5 reps, Type IIb; 6-12 reps, Type IIa; 12 = Type I. Oh, and the basic difference between a Type IIa and Type IIb fiber is that the IIb can produce a more powerful muscle contraction, whereas the IIa has more muscular endurance.

One of the most famous periodization approaches to training was published in 1981 and has been frequently quoted in North American strength research. This model used “conversion phases” in which the athlete is supposedly able to transfer the hypertrophy gains from bodybuilding protocols into gains in strength and power. It is based upon a “classic model” of periodization presented by Russian sport scientist Leonid Medvedyev in 1964. This model entails doing a large volume of work at a relatively low intensity and then smoothly transferring to a low amount of work at a high intensity.




The sample workout in the model consists of four phases, with each phase lasting three to four weeks, although the maintenance phase could be extended throughout a competitive sport season. The repetition ranges, and estimated intensity levels relative to a one repetition max (1RM), are as follows:

Hypertrophy: 6-12 reps, 67-85 percent of 1RM
Basic Strength: = 6 reps, =85 percent of 1RM
Strength and Power: 1-5 reps, 75-90 percent or 1RM
Peaking or Maintenance: 1-3 reps, vary high to low

Although this approach seems to make sense, and the “hypertrophy” phase offers many benefits, such as increasing growth hormone production, the problem is that it simply is not possible. And why is that? Because you cannot convert a Type I fiber into a Type II fiber. It would be analogous to turning fat into muscle – certainly, you can shrink your fat cells, but you can’t convert them into muscle fibers. Further, trying to develop all types of muscle fibers to their highest levels is simply not possible, as the body’s ability to recover is limited.

Yes, there are some strong bodybuilders out there, but for them to focus on getting as strong as weightlifters would take away from their ability to develop as much muscle mass as possible. Likewise, for weightlifters to develop as much muscle mass as possible would take away from their ability to be as strong as possible; and it would be even more detrimental for weightlifters in the non-super heavy category, as their success is based upon being as strong as possible while being as light as possible.

Many sports require that athletes develop high levels of absolute strength, and these strength gains will result in increases in muscle mass. But for best results this strength should be functional. From a neuromuscular standpoint, functional programs increase the neural drive to the muscles, improve the synchronization of motor units, increase the activation of contractile apparatus, and decrease inhibition of protective mechanisms of muscle. In layman’s terms, a functional hypertrophy program contributes more to the athlete’s power output and less to their ability to look good at the beach.


Functional Hypertrophy: The Workouts
Let’s put all this theory into practice with an example of a functional hypertrophy workout for the lower body, and then one for the upper back. Let’s start with the legs.

Functional hypertrophy gains in muscle mass in the legs are crucial in sports such as rugby, bobsleigh and the throwing events. One of the best ways to develop functional leg strength is to superset front squats with back squats with only 10 seconds between the two exercises. You may want to call this method an extended set, a term that high-intensity proponents would use to give the false impression that they only did one set per workout (and without counting warm-up sets, of course).

Another description of this type of program is an improved-leverage set, as you pair an exercise in which leverage forces you to use lighter weights (e.g., front squat) with an exercise that enables you to use heavier weights (e.g., back squat). For more examples of this type of training system, see Beyond 2001: The Next Real Step by Jerry Telle, an innovative personal trainer out of Littleton, Colorado. But no matter what you call this system, it can be used to develop the functional leg strength you need to perform at the highest levels that your genetics will enable you to achieve.

Lower Body Functional Hypertrophy Workout
A-1. Front Squat, 5 x 3-4, 4010, rest 10 seconds
A-2. Back Squat, 5 x max reps (probably 1-4 reps), 4010, rest 120 seconds
A-3. Leg Curl, 5 x 4-6, 3110, rest 120 seconds

Select a weight you can lift for 3-4 RM in the front squat. For example, if your best front squat is 220 pounds, your best for 3-4 reps might be 200 pounds. Using the weight you selected, perform the exercise until you reach concentric failure, return the weight to the rack, and then count for 10 seconds as you prepare to perform the back squat. At the end of the 10 seconds, you should already be in position to begin the descent of the back squat. Now perform as many reps of the back squat as possible with the same weight you used in the front squats. Rest two minutes, and then perform some leg curls for a set of 4-6 reps. Rest another two minutes, and repeat the entire series for four additional sets.

If, when you performed the front squats, the weight was light enough to enable you to perform 5 or more reps, then use a heavier weight. If you only performed 1-2 reps, then the weight was too heavy and you need to lighten it up. As you get used to this workout, you will find yourself better able to predict the weights to use to stay within the rep range.

Now let’s move on to a functional hypertrophy workout for the muscles of the upper back. This type of training would be ideal for a gymnast or a wrestler.

Upper Back Functional Hypertrophy Workout
A-1. Wide Pronated-Grip Chin-up, 5 x 4-6, 3010, rest 10 seconds
A-2. Medium Supinated-Grip Chin-up, 5 x max reps (probably 1-4 reps), 3010, rest 120 seconds
A-3. Bent-Over EZ Bar Row, 5 x 6-8, 3020, rest 120 seconds

Obviously, you could substitute lat pulldown variations for the chin-ups, but you will get better results with chin-ups. One reason chins are so effective is that you have to move your entire bodyweight, and the stabilization required to do this (as opposed to using pulldown machines) involves more muscle mass. It’s also more difficult to cheat when performing these exercises – for example, during a pulldown you can cheat by crunching forward with the abdominals. This is also one reason that the strength from chin-ups carries over well to pulldowns, but it doesn’t work the other way around. If you cannot do a chin-up on your own, there are ways to get around this, such as by placing one leg on a knee-high platform behind you (so that you don’t have to lift your entire bodyweight during the exercise) or by having a training partner hold that leg and provide you with assistance.

For this workout, start by using a resistance that will enable you to complete 4-6 reps using the wide pronated-grip chin-up. Rest 10 seconds, and then switch to a medium supinated-grip chin-up and perform as many reps as possible. Even though you are fatigued from the previous set, the improved leverage should enable you to complete several reps. If you are using additional weight, do not decrease the resistance, as your intensity level will fall outside the range of functional hypertrophy. Rest two minutes, and then perform the bent-over EZ bar row for 6-8 reps. Rest another two minutes, and then repeat the entire series for four additional sets.

All this is solid information, but keep in mind there is much more to know about functional hypertrophy. For example, I often prescribe a “back-off set” of 25 reps in certain exercises after the primary sets of a functional training protocol. Research from Japanese sport scientists has found that this additional set increases the production of growth hormone and as such leads to greater gains in anaerobic lactic capacity (basically muscular endurance) and strength. There are many other methods, which are covered in my higher-level PICP courses and my Special Consideration Training Series seminars.

Just about any workout program that follows the concept of progressive resistance will produce gains in muscle mass. But if you want to be as strong as you look and be able to display that strength on the athletic field, focus on functional hypertrophy.

Friday, March 19, 2010

A Mass Gain Theory by Glenn Pendlay

GAIN WEIGHT WITH CONCENTRIC MOVEMENTS




As most of you know, I train athletes and not bodybuilders, so often the methods I use are geared mostly towards strength with little regard to gaining size, or even geared specifically toward gaining strength WITHOUT any size gain for athletes in specific weight classes.


that having been said, I usually have a hard time keeping weight off the guys, the volume of training we do often means that the guys must watch the diet really close to avoid growing out of their proper weight class.


now, having said all that, there are times when I have a guy that needs to move up a weight class quickly, for instance I recently had a guy that needed to move from the 77kilo weight class to the 85kilo (or from 169lbs to 187lbs) weight class because in his particular division the competition was actually easier at 85.


This particular guy usually trains about 10-12lbs overweight, so I actually had to move him from 180lbs to about 200lbs in 8 weeks, hopefully with no body fat increase, and of course with no drugs. I thought id share one of the ways I have accomplished this quick weight gain in the past and how I did it in this case. In case you wondered, he did accomplish this, weighed 201lbs 2 weeks before competition, and is now cutting for competition; he’s weighing 195 now one week out, most of the rest well sweat off the day of weigh in.


the best way to accomplish weight gain is with of course more food and increased training volume, but I run into a problem here because my guys are squatting hard 3 days a week already, and doing maximal lifts in heavy leg and back exercises like the snatch and clean and jerk 6 days a week already... so adding volume in the conventional way would quickly result in an athlete breaking down.


So I use an idea that didn’t start with Westside, but has been recently popularized by them, concentric only exercise. The good thing about this is that it seems to have a good effect on the body, but doesn’t really make you sore, and doesn’t seem to affect recovery that much; in some athletes it seems to even help it.


The way I structure the workouts is this, the regular training around noon, and the extra workouts around 6 or 7 pm. typical exercises are as follows.


Walking up stairs with weight, taking the elevator down. For this I have a long, thin bag filled with sand, actually several of them. An athlete takes a bag, say a 50lb bag, and walks up 2 flights of stairs, then walks to the elevator and rides it back down.


Heavy ball throws. I have various bags and balls weighing between 20 and 100lbs. the athlete gets his arms around one on the ground, then with a clean or snatch type motion throws it up and behind them. It hits the ground; they turn around and throw it back. We usually do 10 throws at a time.


Various sled pulling. This is pure Westside; they have come up with many variations of this. a couple that we use are simply to attach a rope from the sled to the waist, usually around a weight belt, and walk 40 or 50 yards taking long, straight legged strides. for the upper body, we use two ropes, each with a handle, and for instance do a bench press type motion to pull the sled forward, then walk a step, then press again, etc. or turn around and do the same thing with a row motion. we also put the rope between our legs, and face away from the sled... as you take a step, straighten the body slightly, this pulls the sled forward. Take another step to take the slack out, and then do it again.


all of these things work the major muscle groups with concentric only action... adding to the workload but not compromising recovery ability that much, as long as you get extra sleep and remember to take in more food at least. Using these sorts of methods seems to allow athletes to handle more workload than they could with only normal exercises, but it’s important I think to time the workouts right. You want to do these "extra" workouts 4-6 hours after your normal workouts if possible. I know others who have done their regular workouts in the evenings, and gotten up and done these extra workouts in the mornings and had good results, but I haven’t tried that much.


I am not really sure how these types of things would work for bodybuilders... however I have to think that they would in fact work... I mean one of the reasons I don’t use them more in regular training is that it tends to make it too hard to keep a guys weight. They seem to be particularly effective for adding mass to the hamstrings, calves, glutes, and the spinal erectors and also upper back.


one other thing, we alter the weight we use for each day much as Westside does... in other words, if you do it 3 days in a row, the second day you use half the weight you used on the first day, the third day half of what you used on the second day, and then you start over again with 100% weight. If any of you bodybuilders out there thinks about trying this, I’d is interested to hear how it worked for you.

Monday, March 8, 2010

Power and the Olympic lifts

by Pierre Roy

The concept of power is misunderstood.

Considering that power is the combination of strength and speed and knowing that strength is the easiest element to improve it is taken for granted that to improve levels of power and consequently of performance, it was thought to be enough to raise the level of strength.

This observation is true to some extent ... the difficulty is that often increases in strength occurs at the expense of technique and the speed of the bar in various stages of movement so that if this process is applied incorrectly, it will weaken the nervous system, and thus potentially affect speed and coordination.

Full article.

Tuesday, January 19, 2010

Assigning Weight Changes within a Workout

by Glenn Pendlay

Jim O’Malley pointed something out to me a number of years ago which maybe should have been self-evident, but I had never thought about before. He told me that every weight required a slightly different body position, and a slightly different coordination of the muscles in order for the bar/body unit to be in the correct balance and for the maximum force in the correct direction to be imparted to the bar. He said that because of this, it took greater skill to lift a series of repetitions or sets where the weight on the bar was different every time than it took to lift the same weight over and over. Of course, this is a skill that is needed for a weightlifting competition, where the weight must change each attempt unless you miss!

Over the years I have seen the truth of this, and have used this idea more and more when I program training. I use it to differentiate the training of the novice, intermediate, and advanced lifters, and I use it within the preparation period for a contest with each level of lifter.

Full article.